Epigen Epoxy Resin Products

“Performance Resins and Composite Systems”

www.peerlessindustrialsystems.com
www.epigen.com
www.chemproof.com.au
www.prolongproducts.com

Epigen products are classified into the following groups displayed in this guide:

411 Primer

0411 is a two-component, flexibilized, multipurpose epoxy resin binder which can be used as a metal or concrete primer, or adhesive to bond fiberglass, wood, fabric, steel or a variety of plastics. Based on epoxy and polyurethane technology, resilience is a key characteristic of 0411 and meets a broad spectrum features that lends it to many varied and diverse tasks.

Learn More

503 Wet or Dry Putty

Epigen 503 is a two-component solventless epoxy which, when mixed, solidifies at ambient temperature to form a strong, tough material, possessing good mechanical properties and adhering strongly to suitably treated metal, timber and concrete surfaces.

Learn More

1009 Bond/Repair

A tough infusible solvent-free epoxy resin-based system designed for use as a multipurpose high strength casting and grouting polymer and “wet to dry” concrete adhesive. It may be applied by either roller or brush.

Learn More

XD003

A high performance, solventless, two-component polymer adhesive designed to meet the highest standards of elevated temperature service, chemical resistance, and corrosion protection. Characterized by superior toughness and durability, suitable for most extreme adhesive applications including ceramic wear tile bedding and grouting applications. It can be sanded or machined to shape and tolerances.

Learn More

301 High Strength

A tough infusible solvent-free advanced composite system developed to be used as a multipurpose high strength casting and grouting polymer. Exhibits excellent chemical resistance, corrosion resistance, and high structural integrity under stress in both compression and tension.

Learn More

FC 4

A very fast curing, tough solvent-free composite grout developed to be used as a multipurpose high strength casting adhesive polymer. Possesses excellent chemical resistance, corrosion resistance, and high structural integrity under stress in both compression and tension

Learn More

907 High Strength Putty

A tough multipurpose epoxy paste for general adhesive, grouting and caulking applications, for use on a variety of surfaces including steel, concrete, timber and fiberglass. Characterized by exceptional toughness and durability, originally designed for ceramic wear tile bedding and grouting. Uses extend to fairing blowholes on concrete, and pitting on steel surfaces prior to coating. Can be sanded or machined to shape or tolerances.

Learn More

FC 1

A fast curing epoxy paste for adhesive applications, suited for grouting and caulking when downtime is critical. Bonds to a variety of surfaces including steel, concrete, timber and fiberglass.

Learn More

FC 3 Gap Bridging Putty

A fast curing patching paste for repairing holes, cracks and gaps, characterized by the fiber reinforcement that allows voids to be bridged adding structural strength. Bonds to a variety of surfaces including steel, plastics, timber and fiberglass.

Learn More

911 High Bond Putty

A high strength multipurpose paste suitable for grouting and caulking, designed for use on a variety of surfaces including steel, concrete, timber and fiberglass. Characterized by exceptional toughness and durability, use has extended to ceramic wear tile bedding and grouting, fairing blowholes on concrete, and pitting on steel surfaces prior to coating

Learn More

1614 Flexible Putty

Manufactured to a putty-like viscosity, this flexible epoxy grouting & caulking system is designed for use as a concrete joint sealant in trafficable or heavy-duty applications. Characterized by exceptional toughness and durability, use has extended to flexible grouting of equipment.

Learn More

1614 Flexible Liquid

A low viscosity, flexible epoxy grouting & caulking system designed for use as a concrete joint sealant in trafficable or heavy duty applications. Characterised by exceptional toughness and durability, use has extended to flexible grouting of equipment and concrete crack injection.

Learn More

XD003 High Strength Paste

A high performance, solventless, two-component polymer adhesive designed to meet the highest standards of elevated temperature service, chemical resistance, and corrosion protection. Characterized by superior toughness and durability, suitable for most extreme adhesive applications including ceramic wear tile bedding and grouting applications. It can be sanded or machined to shape and tolerances.

Learn More

907 High Strength Paste

A tough multipurpose epoxy paste for general adhesive, grouting and caulking applications, for use on a variety of surfaces including steel, concrete, timber and fiberglass. Characterized by exceptional toughness and durability, originally designed for ceramic wear tile bedding and grouting. Uses extend to fairing blowholes on concrete, and pitting on steel surfaces prior to coating. Can be sanded or machined to shape or tolerances.

Learn More

FC 1 Paste

A fast curing epoxy paste for adhesive applications, suited for grouting and caulking when downtime is critical. Bonds to a variety of surfaces including steel, concrete, timber and fiberglass.

Learn More

301 High Strength Liquid

A tough infusible solvent free advanced composite system developed to be used as a multipurpose high strength casting and grouting polymer. Exhibits excellent chemical resistance, corrosion resistance, and high structural integrity under stress in both compression and tension.

Learn More

3422 Mortar Binder

3422 is a two-component, multipurpose epoxy resin binder system originally designed for use as a bridge nosing compound where shock and load require some degree of resilience. It can be used as a concrete primer, a fiberglass laminating resin, or filled with a variety of aggregates to produce a fast curing, high strength epoxy mortar. Based on polyamide technology, displays broad-spectrum features that lends it to many varied and diverse tasks. 3422 can be blended with a variety of aggregates to define strength and service capabilities.

Learn More

FC 4 Liquid

A very fast curing, tough solvent-free composite grout developed to be used as a multipurpose high strength casting adhesive polymer. Possesses excellent chemical resistance, corrosion resistance, and high structural integrity under stress in both compression and tension.

Learn More

XD030 High Strength Liquid

Epigen XD030 is a controlled release product developed to provide the high performance, high temperature chemical and corrosion resistance characterised by the Epigen XD series, but additionally to provide theseproperties in a flowable grout based system.

Learn More

1412

Substitute for traditional Coal Tar Coatings eliminating the health concerns associated with Coal Tar, 1412 is a highly resilient, surface tolerant, solventless epoxy synthetic hydrocarbon blend provides a tough, flexible coating possessing a high degree of corrosion resistance. Characterised by its strong adhesive nature, application to suitably prepared metal, wood and concrete surfaces by brush roller or spray techniques ensures excellent resistance and protection from a wide range of chemicals, particularly salt water and alkali solutions Highly resistant to aqueous solutions as a result of the hydrophobic nature of the synthetic hydrocarbon, 1412 meets a high standards of corrosion protection.

Learn More

4029

Designed as the ultimate chemical resistant high build coating, 4029 is based on high performance Novalac resin technology, solventless in nature, to meet the highest practical standards of chemical resistance and corrosion protection achievable.

Learn More

1344

A solventless, high build protective coating, designed specifically for use in potable water applications to combat corrosion in tanks, wells, structural members and fluid transfer systems. It is an ambient temperature curing product with suitablity in low application temperature environments, curing to form a tough, semi-flexible lining, adhering strongly to suitably prepared metal, wood and concrete surfaces

Learn More

XD005 High Build

A high performance, solventless, epoxy polymer lining designed to meet the highest standards of elevated temperature service, chemical resistance, and corrosion protection.

Learn More

1311 High Build

A solventless, high build protective coating, designed to combat corrosive conditions in tanks, wells, structural members and fluid transfer systems. It cures at ambient temperatures to form a tough, semi-flexible coating possessing good chemical resistance and U.V. stability, adhering strongly to suitably prepared metal, wood and concrete surfaces.

Learn More

1369 High Build

A solventless, high build protective coating, possessing exceptional heat resistance properties under ambient cure conditions. Suitable for use in potable water applications up to 100 celcius, to combat corrosion in tanks, wells, structural members and fluid transfer systems, this high performance, epoxy polymer lining is designed to meet high standards of elevated temperature service and chemical resistance, with minimal reliance on post cure.

Learn More

XD005SN

Epigen XD-005 Special Novolac is a controlled release product developed to provide the high performance, high temperature chemical and corrosion resistance characterised by Epigen XD-005, but additionally to provide this chemical resistant protection at temperatures exceeding 200°C.

Learn More

XD005FL

Based on the high performance, solventless, EPIGEN XD005, this polymer lining incorporates glass flake for increased resistance to transmission of vapour. Already meeting the highest standards of elevated temperature service, chemical resistance and corrosion protection, the glass flake improves abrasion resistance and offers addition service properties where unique requirements exist.

Learn More

XD005Ultra

Epigen XD005ULTRA brings together all the real high performance, solventless, properties derived from the EPIGEN XD005 technology , with the practical ease of real Ultra High Build outcomes. Already meeting the highest standards of elevated temperature service, chemical resistance and corrosion protection, the Ultra allows builds of up to 20mm in one application to thoroughly line badly corroded assets, and ensure enough lining can be applied in a very short time to cover and protect.

Learn More

1311FL

A solventless, glass flake filled high build protective coating, designed to combat corrosive conditions on pumps, valves, structural members and fluid transfer systems. It cures at ambient temperatures to form a tough, semi-flexible coating possessing good chemical resistance and U.V. stability, adhering strongly to suitably prepared metal, wood and concrete surfaces.

Learn More

1311ULTRA

ULTRA is a unique solventless epoxy high build protective coating designed to provide builds as high as 20mm in one application, to combat corrosive conditions in sewers, tanks, wet wells, and protect structures like wharfs, offshore assets or ships. It cures at ambient temperatures to form a tough, semi-flexible coating possessing good chemical resistance and U.V. stability, adhering strongly to suitably prepared metal and concrete surfaces

Learn More

1412

Substitute for traditional Coal Tar Coatings eliminating the health concerns associated with Coal Tar, 1412 is a highly resilient, surface tolerant, solventless epoxy synthetic hydrocarbon blend provides a tough, flexible coating possessing a high degree of corrosion resistance. Characterised by its strong adhesive nature, application to suitably prepared metal, wood and concrete surfaces by brush roller or spray techniques ensures excellent resistance and protection from a wide range of chemicals, particularly salt water and alkali solutions Highly resistant to aqueous solutions as a result of the hydrophobic nature of the synthetic hydrocarbon, 1412 meets a high standards of corrosion protection.

Learn More

4029

Designed as the ultimate chemical resistant high build coating, 4029 is based on high performance Novalac resin technology, solventless in nature, to meet the highest practical standards of chemical resistance and corrosion protection achievable.

Learn More

1344

A solventless, high build protective coating, designed specifically for use in potable water applications to combat corrosion in tanks, wells, structural members and fluid transfer systems. It is an ambient temperature curing product with suitablity in low application temperature environments, curing to form a tough, semi-flexible lining, adhering strongly to suitably prepared metal, wood and concrete surfaces

Learn More

XD005 High Build

A high performance, solventless, epoxy polymer lining designed to meet the highest standards of elevated temperature service, chemical resistance, and corrosion protection.

Learn More

1311 High Build

A solventless, high build protective coating, designed to combat corrosive conditions in tanks, wells, structural members and fluid transfer systems. It cures at ambient temperatures to form a tough, semi-flexible coating possessing good chemical resistance and U.V. stability, adhering strongly to suitably prepared metal, wood and concrete surfaces

Learn More

1369 High Build

A solventless, high build protective coating, possessing exceptional heat resistance properties under ambient cure conditions. Suitable for use in potable water applications up to 100 celcius, to combat corrosion in tanks, wells, structural members and fluid transfer systems, this high performance, epoxy polymer lining is designed to meet high standards of elevated temperature service and chemical resistance, with minimal reliance on post cure.

Learn More

XD001BR

A high performance solvent free coating filled with ceramic particles to combat abrasive conditions in a broad range of applications. The epoxy resin base designed to meet the highest standards of high temperature service and chemical resistance provides additional benefits in superior adhesive strength, high corrosion resistance, mechanical properties greater than standard, simply designed to meet the highest success in elevated temperature service.

Learn More

XD005FL

Based on the high performance, solventless, EPIGEN XD005, this polymer lining incorporates glass flake for increased resistance to transmission of vapour. Already meeting the highest standards of elevated temperature service, chemical resistance and corrosion protection, the glass flake improves abrasion resistance and offers additional service properties where unique requirements exist.

Learn More

XD005Ultra

Epigen XD005ULTRA brings together all the real high performance, solventless, properties derived from the EPIGEN XD005 technology , with the practical ease of
real Ultra High Build outcomes. Already meeting the highest standards of elevated temperature service, chemical resistance and corrosion protection, the Ultra allows builds of up to 20mm in one application to thoroughly line badly corroded assets, and ensure enough lining can be applied in a very short time to cover and protect.

Learn More

1311FL

A solventless, glass flake filled high build protective coating, designed to combat corrosive conditions on pumps, valves, structural members and fluid transfer
systems. It cures at ambient temperatures to form a tough, semi-flexible coating possessing good chemical resistance and U.V. stability, adhering strongly to suitably prepared metal, wood and concrete surfaces.

Learn More

1311ULTRA

ULTRA is a unique solventless epoxy high build protective coating designed to provide builds as high as 20mm in one application, to combat corrosive conditions in sewers, tanks, wet wells, and protect structures like wharfs, offshore assets or ships. It cures at ambient temperatures to form a tough, semi-flexible coating possessing good chemical resistance and U.V. stability, adhering strongly to suitably prepared metal and concrete surfaces

Learn More

806BR

A two component, brushable compound containing fine ceramic particles to combat abrasive conditions in a broad range of applications. The epoxy resin base provides additional benefits in the form of superior adhesive strength, high corrosive resistance and excellent mechanical properties and adhering strongly to suitably treated metal, concrete and other substances.

Learn More

XD008BR

A ceramic filled, high performance, solvent free coating to combat abrasive conditions in a broad range of applications, the XD008BR is designed to meet high standards of high temperature and chemical resistance providing additional benefits in superior adhesive strength, chemical resistance, and mechanical properties.

Learn More

4055

Developed as a multipurpose binder system for use as a hard wearing lining that possesses resistance to the effects of corrosive chemicals. Primarily designed for use in Nitric Acid proofing of concrete and bunds, the performance of Epigen 4055 is equally satisfactory for use in the protection of structural steel work, pump bases and various other static fixtures in contact with corrosive chemicals.

Learn More

4029

Designed as the ultimate chemical resistant high build coating, 4029 is based on high performance Novalac resin technology, solventless in nature, to meet the highest practical standards of chemical resistance and corrosion protection achievable.

Learn More

4029FC

4029 was designed as the ultimate chemical resistant high build coating. 4029FC has increased resistance to chemicals and higher strength but requires consideration for a very short pot life and fast cure. 4029FC is based on high performance Novalac resin technology with a fast acting cycloaliphatic amine, and maintains solventless character to meet the highest standards of chemical resistance and corrosion protection achievable.

Learn More

4040FC

4040FC is the state of art binder providing the ultimate chemical resistance, high strength and fast cure that is peerless. 4040FC is based on high performance Novalac resin technology with a fast acting cycloaliphatic amine, and maintains solventless character to meet the highest standards of chemical resistance and corrosion protection achievable.

Learn More

4040 Flooring Binder

4040 is a multipurpose binder providing excellent chemical resistance to a wide range of acids and alkali, in many different applications. 4040 is based on a high performance Novalac resin technology with cycloaliphatic amine and solventless character for increased OH&S, to meet the highest standards of user safety and corrosion protection.

Learn More

4028 Flooring Binder

4028 is the multipurpose binder providing the excellent chemical resistance, high strength and good working life for a solid colour finish. 4028 is based on high performance Novalac resin technology with a high performance cycloaliphatic amine blend, and maintains solventless character to meet the highest standards of chemical resistance and corrosion protection.

Learn More

4030

One of the Chemproof range of products, renowned for extremely high chemical resistance, 4030 is a thixotropic multipurpose epoxy mortar designed for general concrete repair and fairing of damaged bases and structures. Also suitable in adhesive, grouting and caulking applications, the use is primarily where binder/sand combinations of other products cannot acheive the build necessary on inverted, overhead or vertical surfaces.

Learn More

4028FC Binder

4028FC is the multipurpose binder providing the ultimate chemical resistance, high strength and fast cure for a solid colour finish. 4028FC is based on high performance Novalac resin technology with a high performance cycloaliphatic amine blend, and maintains solventless character to meet the highest standards of chemical resistance and corrosion protection.

Learn More

XD005

A high performance, solventless, epoxy polymer lining designed to meet the highest standards of elevated temperature service, chemical resistance, and corrosion protection.

Learn More

1369

A solventless, high build protective coating, possessing exceptional heat resistance properties under ambient cure conditions. Suitable for use in potable water
applications up to 100 celcius, to combat corrosion in tanks, wells, structural members and fluid transfer systems, this high performance, epoxy polymer lining is designed to meet high standards of elevated temperature service and chemical resistance, with minimal reliance on post cure.

Learn More

XD008BR

A ceramic filled, high performance, solvent free coating to combat abrasive conditions in a broad range of applications, the XD008BR is designed to meet high standards of high temperature and chemical resistance providing additional benefits in superior adhesive strength, chemical resistance, and mechanical properties.

Learn More

XD004

XD004 is a two component, epoxy resin binder system that exhibits extremely high strength when post cured, and is suitable in providing service well over 150 Celsius maintaining stability and mechanical properties. It is suitable for service as a metal or concrete primer, a fibreglass laminating resin, or filled with a variety of aggregates to produce a high strength epoxy mortar with extremely good chemical resistance.

Learn More

XD008 Putty

A ceramic filled, high performance, solvent free putty for use in abrasive conditions across a broad range of applications, the XD008 is designed to perform where high standards of temperature and chemical resistance are required.

Learn More

XR367 PHOENIX

Phoenix is a new generation composite compound that has been formulated to use all the advantages of epoxy polymer technology, with refractory properties. Phoenix exhibits none of the burning, smoking, fumes or other fire hazards associated with traditional materials. It can be used to treat a variety of new or damaged surfaces and components to improve or prolong their life under high heat normally associated with spillages of molten metals. Phoenix is a two component polymer composite comprising graded inorganic fillers of extreme hardness and abrasion resistance. The polymer binder cures to form a tough, infusible material possessing excellent chemical resistance, and adheres strongly to suitably treated surfaces.

Learn More

XD005SN

Epigen XD-005 Special Novolac is a controlled release product developed to provide the high performance, high temperature chemical and corrosion resistance characterised by Epigen XD-005, but additionally to provide this chemical resistant protection at temperatures exceeding 200°C.

Learn More

XD005FL

Based on the high performance, solventless, EPIGEN XD005, this polymer lining incorporates glass flake for increased resistance to transmission of vapour. Already meeting the highest standards of elevated temperature service, chemical resistance and corrosion protection, the glass flake improves abrasion resistance and offers addition service properties where unique requirements exist.

Learn More

XD005ULTRA

Epigen XD005ULTRA brings together all the real high performance, solventless, properties derived from the EPIGEN XD005 technology , with the practical ease of real Ultra High Build outcomes. Already meeting the highest standards of elevated temperature service, chemical resistance and corrosion protection, the Ultra allows builds of up to 20mm in one application to thorough line badly corroded assets, and ensure enough lining can be applied in a very short time to cover and protect

Learn More

XD001

A trowelable, high performance solventless, two component polymer composite containing graded ceramic particles in an epoxy resin, designed to meet the highest standards of elevated temperature service, chemical resistance, and corrosion protection.

Learn More

XD001BR

A high performance solvent free coating filled with ceramic particles to combat abrasive conditions in a broad range of applications. The epoxy resin base designed to meet the highest standards of high temperature service and chemical resistance providing additional benefits in superior adhesive strength, high corrosion resistance, mechanical properties greater than standard, simply designed to meet the highest success in elevated temperature service.

Learn More

0301

A tough infusible solvent free advanced composite system developed to be used as a multipurpose high strength casting and grouting polymer. Exhibits excellent chemical resistance, corrosion resistance, and high structural integrity under stress in both compression and tension.

Learn More

2816CL

Epigen 2816CL is a two component, unfilled epoxy binder which can be used unfilled as a clear finish on floors or fixtures, resin for fibreglass laminating, or clear casting material.

Learn More

0907

A tough multipurpose epoxy paste for general adhesive, grouting and caulking applications, for use on a variety of surfaces including steel, concrete, timber and fibreglass. Characterised by exceptional toughness and durability, originally designed for ceramic wear tile bedding and grouting. Uses extend to fairing blowholes on concrete, and pitting on steel surfaces prior to coating. Can be sanded or machined to shape or tolerances.

Learn More

FC1

A fast curing epoxy paste for adhesive applications, suited for grouting and caulking when down time is critical. Bonds to a variety of surfaces including steel, concrete, timber and fibreglass.

Learn More

0402

0402 is a two component, multipurpose epoxy resin binder system which can be used as a metal or concrete primer, a fibreglass laminating resin, or filled with a variety of aggregates to produce a medium rate curing, high strength epoxy mortar. Based on polyamide technology, adhesion is a key characteristic of 0402 and meets broad spectrum features that lends it to many varied and diverse tasks.

Learn More

1513

A tough multipurpose epoxy mortar for general concrete repair and fairing. Also suitable in adhesive, grouting and caulking applications, for use primarily on concrete however equally suitable on fiber cement, polystyrene foam and timber.

Learn More

XD004

XD004 is a two component, epoxy resin binder system that exhibits extremely high strength when post cured, and is suitable in providing service well over 150 Celsius maintaining stability and mechanical properties. It is suitable for service as a metal or concrete primer, a fibreglass laminating resin, or filled with a variety of aggregates to produce a high strength epoxy mortar with extremely good chemical resistance.

Learn More

0405

0405 is a multipurpose binder designed to be used with graded aggregate as a hard wearing service to top concrete floors against a wide range of conditions, in particular acids associated with foods. 0405 is based on high performance polymer technology used with drinking water approved systems and is solventless for inceased OH&S, to meet the highest standards of user safety.

Learn More

3422

3422 is a two component, multipurpose epoxy resin binder system originally designed for use as a bridge nosing compound where shock and load require some degree of resilience. It can be used as a concrete primer, a fibreglass laminating resin, or filled with a variety of aggregates to produce a fast curing, high strength epoxy mortar. Based on polyamide technology, displays broad spectrum features that lends it to many varied and diverse tasks. 3422 can be blended with a variety of aggregates to define strength and service capabilities.

Learn More

XD001 MG

A high performance, solventless, two component polymer composite based on a fine grading of ceramic particles dispersed in an epoxy resin designed to meet the highest standards of elevated temperature service, chemical resistance, and corrosion protection.

Learn More

XD001

A trowelable, high performance solventless, two component polymer composite containing graded ceramic particles in an epoxy resin, designed to meet the highest standards of elevated temperature service, chemical resistance, and corrosion protection.

Learn More

806 Putty

A two component polymer composite based on epoxy resin and abrasion resistant material which when mixed according to directions, cures at room temperature to form a tough, inert material possessing excellent wear resistance properties and adhering strongly to suitably treated metal, concrete and other substances.

Learn More

XD008

A ceramic filled, high performance, solvent free putty for use in abrasive conditions across a broad range of applications, the XD008 is designed to perform where high standards of temperature and chemical resistance are required.

Learn More

XD008 BR

A ceramic filled, high performance, solvent free coating to combat abrasive conditions in a broad range of applications, the XD008BR is designed to meet high standards of high temperature and chemical resistance providing additional benefits in superior adhesive strength, chemical resistance, and mechanical properties.

Learn More

XD001 BR

A high performance solvent free coating filled with ceramic particles to combat abrasive conditions in a broad range of applications. The epoxy resin base designed to meet the highest standards of high temperature service and chemical resistance providing additional benefits in superior adhesive strength, high corrosive resistance, mechanical properties greater than standard, simply designed to meet the highest success in elevated temperature service.

Learn More

806 MG

A two component polymer composite based on a fine grading of ceramic particles dispersed in an epoxy resin creating an extremely abrasion resistant material which when mixed according to directions, cures at room temperature to form a tough, smooth, inert material possessing excellent wear resistance properties and adhering strongly to suitably treated metal, concrete and other substances.

Learn More

3523

Tough, resilient, Wearflex is a high impact resistant wearing compound that contains a modified polyurethane hybrid polymer backbone. It is formulated to treat new or worn components to improve or prolong their life under abrasive and erosive conditions. Wearflex is a two part polymer composite comprising graded sintered ceramic of extreme hardness and abrasion resistance. The polymer binder cures to form an infusible material possessing excellent wear resistance to heavy impingement and impact, and adheres strongly to suitably treated metal.

Learn More

806 BR

Tough, resilient, Wearflex is a high impact resistant wearing compound that contains a modified polyurethane hybrid polymer backbone. It is formulated to treat
new or worn components to improve or prolong their life under abrasive and erosive conditions. Wearflex is a two part polymer composite comprising graded sintered ceramic of extreme hardness and abrasion resistance. The polymer binder cures to form an infusible material possessing excellent wear resistance to heavy impingement and impact, and adheres strongly to suitably treated metal.

Learn More

806 PR

A two component, liquid containing fine ceramic particles to combat abrasive conditions in a broad range of applications. The epoxy polymer base provides benefits in the form of superior adhesive strength, high corrosive resistance and excellent mechanical properties, and adhering strongly to suitably treated metal.

Learn More

3773

A wearing compound that can be used to treat a variety of new or worn components to improve or prolong the life under abrasive and erosive conditions. Resist Abrade is a two component polymer composite comprising graded sintered ceramic of extreme hardness and abrasion resistance. The polymer binder cures to form a tough, infusible material possessing excellent wear resistance and adheres strongly to suitably treated metal without sag at thicknesses in excess of 40mm.

Learn More

FC 2

A rapid set, two component polymer composite based on epoxy resin and abrasion resistant ceramic which when mixed according to directions, cures at room
temperature to form a tough, inert material possessing excellent wear resistance properties and adhering strongly to suitably treated metal, concrete and other substances.

Learn More

405 Binder

0405 is a multipurpose binder designed to be used with graded aggregate as a hard wearing service to top concrete floors against a wide range of conditions, in
particular acids associated with foods. 0405 is based on high performance polymer technology used with drinking water approved systems and is solventless for inceased OH&S, to meet the highest standards of user safety.

Learn More

402 Multipurpose

0402 is a two component, multipurpose epoxy resin binder system which can be used as a metal or concrete primer, a fibreglass laminating resin, or filled with a variety of aggregates to produce a medium rate curing, high strength epoxy mortar. Based on polyamide technology, adhesion is a key characteristic of 0402 and meets broad spectrum features that lends it to many varied and diverse tasks.

Learn More

2816

A multipurpose, solventless epoxy system designed to meet the highest standards of colour retention, chalk resistance, and abrasion resistance. A coating preferred by general industry in applications such as concrete, timber, and steel coating of factories, warehouses, workshops, for a variety of services.

Learn More

3422 Binder

3422 is a two component, multipurpose epoxy resin binder system originally designed for use as a bridge nosing compound where shock and load require some degree of resilience. It can be used as a concrete primer, a fibreglass laminating resin, or filled with a variety of aggregates to produce a fast curing, high strength epoxy mortar. Based on polyamide technology, displays broad spectrum features that lends it to many varied and diverse tasks. 3422 can be blended with a variety of aggregates to define strength and service capabilities.

Learn More

2614

A solventless epoxy flooring system designed to meet the highest standards of sanitary finishes, exceptional toughness, and durability. A coating specifically designed to be used with graded aggregate to provide a non slip finish for general industry and in the food industry on concrete.

Learn More

2109

EPIGEN 2109 has been developed as a penetration sealer for concrete, brick and other porous surfaces. It will adhere to both new and old materials. A coating for general industry in applications such as concrete, timber, and brick sealing in warehouses, gatages, work-shops, for a variety of services.

Learn More

3321

A two component, solventless epoxy flooring system with specific flexibility and toughness to provide resilience where surfaces may be under extreme flex or movement. Providing exceptional durability, 3321 can be used with graded aggregate to provide a non slip finish for road surfaces as well as steel or concrete.

Learn More

489 Binder

0489 is a binder designed to be economically effective in general filling when used with graded aggregate, providing a hard wearing topping for concrete floors against a wide range of conditions, particularly as a base for top coating systems that provide high protection to acids or simply finished for hygienic or in food processing services. 0489 is based on high performance polymers to make laying and finishing very easy using a variety of installation techniques.

Learn More

2917

A solvent free advanced composite system developed to be used as a self levelling seamless flooring that provides a hard wearing, hygienic, chemical resistant finish. The surface finish may be laid as a traditional smooth, high glaze finish when installed as supplied, or be finished with the inclusion of coarse aggregate to provide a profiled safe trafficable surface where excessive moisture or other hazard may necessitate high safety requirements or non skid properties.

Learn More

2550

A heavy duty solventless epoxy system designed for application to slippery areas to make them safe for pedestrian and rolling equipment or vehicles. Providing a high profile non slip for optimum safety, developed for marine and industrial sites on concrete and decks in factories, warehouses, work-shops, decks and a variety of services

Learn More

T20P

T20P is an emulsion formulation based on poly functional oligomeric silane-siloxane compounds that penetrates, impregnates and chemically reacts with concrete and masonry to provide a water repellent surface.

Learn More

2008

A two component polymer composite putty system, which produces, when cured, a tough, high strength, infusible material capable of being sanded,machined, drilled and tapped, and worked to any specific configuration. It exhibitsexcellent adhesion to a variety of metallic substrates such as stainless steel, iron, brass and aluminium as well as ceramics, wood and concrete.

Learn More

Boatex

Boatex is an epoxy laminating system specifically formulated to provide optimum performance under conventional use conditions. The basis of the system is one resin that can be used with either of two curatives. The curatives may be mixed to form a hybrid of the individual curatives to provide for a range of practical outcomes.

Learn More

301MRD

A solvent free advanced composite system developed to be used as an encapsulating resin around timber, steel and concrete piles to provide a barrier to continued borer and rot degradation, corrosion protection, and structural integrity.

Learn More

1642

Manufactured to a thick liquid viscosity, this flexible epoxy grouting & caulking system is designed for use where high elongation in concrete joint sealant applications is required due to excessive movement. Characterised by excellent toughness and durability.

Learn More

1614 Flexible Putty

Manufactured to a putty like viscosity, this flexible epoxy grouting & caulking system is designed for use as a concrete joint sealant in trafficable or heavy duty applications. Characterised by exceptional toughness and durability, use has extended to flexible grouting of equipment.

Learn More

1614 Flexible Liquid

A low viscosity, flexible epoxy grouting & caulking system designed for use as a concrete joint sealant in trafficable or heavy duty applications. Characterised by exceptional toughness and durability, use has extended to flexible grouting of equipment and concrete crack injection.

Learn More